Tampa, FL
Brushed gold column with rain head, handheld and tub trim
A full brushed gold set: shower column with rain head, handheld on a slide bar and matching tub trim.
Trim · Finish Plumbing
Shower and Tub Trim Installation in Tampa Bay
Trim day is when a bathroom stops being a building site. The valve trim, the head, the handheld and the tub spout go onto finished tile — which means every hole is already cut and there is no second chance at the position.
Updated July 2026 · Licensed CFC1432506
What We Do
Finish plumbing on tile that is already down
Trim is fitted against a surface that cannot be adjusted. The escutcheon has to sit flat against tile that is rarely perfectly flat, the seal behind it has to keep water out of the wall, and the handheld bracket has to land on tile, not on a grout line, at a height that suits the person using it.
We fit trim on showers we roughed in ourselves and on bathrooms roughed in by someone else. If the valve sits too deep for the trim, we will tell you before we start — there are extension kits for some valves and not for others.
- Valve trim, single and multi-handle
- Rain heads on the wall and in the ceiling
- Handhelds on brackets and on slide bars
- Tub spouts and tub filler trim
- Shower bases and linear drains
- Accessible showers with grab bars and niches
Finishes
Matte black, brushed gold, brushed nickel, chrome
The finish is yours to choose; what matters on our side is that every visible piece in one bathroom comes from the same family, and that the parts arrive before we do. A missing handheld hose turns a two-hour trim into two visits.
The photos on this page are all finished work: matte black on a curbless shower in Dunedin, brushed gold columns in Tampa and Clearwater, brushed nickel in St. Petersburg, chrome over a new base.
Accessible Bathrooms
Grab bars, niches and a curbless entry
An accessible shower is a plumbing job and a framing job at once: the base or the sloped floor, the drain position, the grab bars fixed into blocking that has to be there before the tile, and the controls reachable from a seat or from the entry.
Plan it at rough-in. Grab bars screwed into tile without blocking behind it are not grab bars.
Recent Work
Jobs we have done — by city
Clearwater, FL
Rain shower over a soaking tub, and a dual head
Brushed gold rain shower, handheld and tub trim over a soaking tub in one bathroom; a matte black dual shower head with handheld and valve trim in another.
Largo, FL
Walk-in glass shower, mosaic floor
Brushed gold handheld with a black rain head in a walk-in glass shower; valve trim and handheld over a mosaic shower floor with a linear drain.
Dunedin, FL
Curbless shower with a ceiling rain head
Matte black ceiling rain head with a wall head and handheld in a curbless shower.
Venice, FL
Matte black valve trim and handheld
Matte black shower valve trim with a handheld shower, fitted on finished tile.
Clearwater, FL
New shower base, chrome trim and an accessible shower
A new shower base with a centre drain and chrome single-handle trim; on another job, an accessible shower with grab bars and built-in niches.
How It Works
How the job runs
01
Check what is behind the tile
Valve type and how deep it sits decide which trim will fit and whether an extension is needed.
02
Lay the parts out
Every piece unpacked and checked against the order before a single screw goes in.
03
Fit and seal
Escutcheons flat and sealed, brackets into solid backing, heights checked with you.
04
Run and check
Every outlet run, temperature checked at the handle, joints watched under pressure.
Photos
More finished bathrooms
FAQ
Common Questions
Can you fit trim on a shower someone else roughed in?
Usually yes. We check the valve make and how deep it sits behind the tile first — some valves have extension kits, some do not, and it is better to know before the box is opened.
I bought my own fixtures. Will you install them?
Yes. Have every part on site before trim day: valve trim, head, handheld, hose, bracket, spout. Missing hoses are the most common reason a trim visit turns into two.
Can you add a handheld to an existing shower?
Often — on a slide bar or a bracket fed from the existing outlet, or with a diverter if the valve supports one. The valve decides what is possible.
Do you install grab bars?
We install them where there is proper blocking behind the wall. If the bathroom is being redone, tell us at rough-in and the blocking goes in then.
Do you fit linear drains and shower bases?
Yes — both appear on this page. The drain position has to match the base or the tiled floor slope, so it is set at rough-in.
Warranty, permits & who does the work
Workmanship warranty
Workmanship warranty: 5 years on new construction, 1 year on repairs. Equipment carries the manufacturer's warranty.
Who does the work
Pro Plumbers FL is a family-run company. The licence CFC1432506 is held by Liubov Ivanova; Viktor Zarubitskii — in the plumbing trade since 1998 — plans the job, makes the technical decisions and works on site. Our own plumbers do the plumbing. Work outside plumbing, such as concrete cutting, we either do ourselves or bring in a contractor — either way it is written into your quote.
Recent Reviews
Source: Google
Fixtures Sitting in Boxes?
Send photos of the trim you bought and the wall it goes on — we will book the fit.
Licensed CFC1432506 · Insured · Clearwater, FL + 50 miles