Softeners · Whole-House Filters

Water Softeners & Whole-House Filtration in Clearwater and Tampa Bay

Tell us what you notice in your water — spots and scale, a chlorine taste or smell, grit or stains. We look at your water and your house, explain which system fits and why, and quote the installation before any work starts.

Updated October 2026 · Licensed CFC1432506

  • Licensed plumbing contractor CFC1432506
  • Clearwater + 50-mile service area
  • Calls answered 24/7 by Kate, our AI assistant · work Mon–Fri 8am–6pm
Sediment prefilter, press copper bypass and softener and carbon control valves in Dunedin, Florida by PRO PLUMBERS FL, LLC (licence CFC1432506)
Sediment prefilter, press copper bypass and softener and carbon control valves in Dunedin, Florida
Start With What You See

Softener or filter? It depends on the problem

A softener and a filter do different jobs. Most questions we get come down to one of these four.

Spots, scale, crusted fixtures

Water softener

Hard water leaves scale in water heaters, on fixtures and on glass. A softener exchanges the calcium and magnesium that cause it as water passes through its resin. It does not remove chlorine, taste, smell or bacteria.

How a softener works

Chlorine taste or smell

Carbon filter

Activated carbon removes chlorine and chloramine, the disinfectants utilities add on purpose. Pinellas County Utilities uses chloramine, which carbon removes only with enough contact time — so the carbon is sized for the house. Carbon does not soften water.

What carbon removes

Sand, grit, rust flakes

Sediment prefilter

A sediment filter catches particles before they reach faucets, valves and the rest of the treatment system. A flushable screen or a cartridge you change — the right rating depends on what is in your water.

Micron ratings explained

Well water: stains or rotten-egg smell

Test first

Iron and sulfur call for treatment chosen from a water test, not a guess. And if only the hot water smells of rotten eggs, the water heater is usually the source, not the well.

Iron in well water

Many homes on city water want both: a sediment prefilter, carbon, then the softener. Softener, filter or reverse osmosis — what each one removes.

What You Get

How a water treatment job runs

01 Look at the problem

What you see at the taps, your utility's water report or a water test, how many people live in the house and how many bathrooms it has.

02 Size the system

Tank size and valve settings follow your household's water use and the water itself — not a factory default.

03 Install it properly

A sediment prefilter ahead of the softener, bypass valves so the house keeps water during service, and a proper drain connection.

04 Walk you through it

How the system works, when to add salt and when to change a cartridge — with a written report and photos after the visit.

How We Build It

Why our softeners get a prefilter

On city water we do not install a softener without a sediment stage in front of it. The service manual for one of the most common softener control valves traces a plugged inlet, a drain that keeps running and leaks inside the valve to foreign material getting into it. A prefilter keeps that grit out of the valve.

Our usual order is sediment prefilter, carbon, softener, then a clear post-filter, all on a bypass. Carbon goes first because free chlorine shortens the life of softener resin, according to the resin manufacturer's own manual. The post-filter shows what the system delivers and catches media if something inside a tank fails.

This is how we build our systems. It is our practice, not a code requirement, and not a rule for every brand of equipment. What your house needs depends on the water and the equipment, and we explain the choice before you decide.

Sediment prefilter and post-filter housings on press copper with bypass ball valves in Dunedin, Florida by PRO PLUMBERS FL, LLC (licence CFC1432506)
Sediment prefilter and post-filter housings on press copper with bypass ball valves in Dunedin, Florida
Our Work

Real installations by our team

Dunedin, FL

Carbon tank and softener on press copper

A sediment prefilter, a carbon tank, a softener and a post-filter, connected in press-fit copper with a bypass of quarter-turn ball valves. An automatic shutoff on the main valve closes the water if its leak probe gets wet.

Softener and carbon tanks with digital control valves in Dunedin, Florida by PRO PLUMBERS FL, LLC (licence CFC1432506)
Softener and carbon tanks with digital control valves in Dunedin, Florida
Dunedin, FL

500-micron spin-down prefilter at the service entry

A whole-house spin-down prefilter with a clear bowl and a flush valve, fixed to strut so the pipe carries no weight. PVC on the service line up to the wall and CPVC from the wall into the house, matching the existing piping.

500 micron spin-down sediment prefilter with clear bowl and flush valve on strut channel in Dunedin, Florida by PRO PLUMBERS FL, LLC (licence CFC1432506)
500 micron spin-down sediment prefilter with clear bowl and flush valve on strut channel in Dunedin, Florida
Wesley Chapel, FL

Softener with a sediment prefilter in a garage

A softener, brine tank and wall-mounted sediment prefilter in the corner of a garage, with CPVC brought down from the ceiling.

Garage water softener installation with sediment prefilter and CPVC drop from the ceiling in Wesley Chapel, Florida by PRO PLUMBERS FL, LLC (licence CFC1432506)
Garage water softener installation with sediment prefilter and CPVC drop from the ceiling in Wesley Chapel, Florida
Sarasota, FL

Outdoor softener on a level concrete pad

A softener, brine tank and prefilter installed outside on a concrete pad, with CPVC supply and return lines and bypass valves on the wall.

Exterior water softener with prefilter and brine tank on a concrete pad in Sarasota, Florida by PRO PLUMBERS FL, LLC (licence CFC1432506)
Exterior water softener with prefilter and brine tank on a concrete pad in Sarasota, Florida
Bradenton, FL

Clear sediment housing with a pressure gauge

Part of a two-tank softener and filter system. A clear housing lets the owner see when the cartridge needs changing.

Clear sediment filter housing with pressure gauge in Bradenton, Florida by PRO PLUMBERS FL, LLC (licence CFC1432506)
Clear sediment filter housing with pressure gauge in Bradenton, Florida
Visit & Contact

Walkthrough, diagnostics and how to reach us

  • Free walkthrough within 25 miles of Clearwater. If diagnostics or measurements are needed, the visit is $150 — credited toward the job if you hire us.
  • Already bought a system? We install equipment you bought yourself, and we service control valves such as Clack and Fleck, including on systems we did not install.
  • Calls: answered 24/7 by Kate, our AI voice assistant, who takes down what you need. Overnight requests are the first we review in the morning; work is scheduled Monday–Friday, 8am–6pm.
  • Written requests: a WhatsApp message or an email to info@proplumbers.pro reaches our team. The request form opens WhatsApp with your details filled in — you send it from there.
  • Our team speaks English and Russian. Licensed Florida plumbing contractor CFC1432506.
FAQ

Questions people ask us

Do I need a water softener or a whole-house filter?

It depends on the problem. Scale and spots mean hard water, which a softener fixes. A chlorine taste or smell is a job for carbon, and grit is a job for a sediment filter. Many homes on city water get a combined system; we look at your water and the house before recommending one.

Does a water softener remove chlorine or chloramine?

No. A softener removes hardness. Activated carbon removes chlorine and chloramine, which is why a carbon tank goes before the softener in a combined system.

Why do you put a sediment filter before the softener?

Grit damages the softener's control valve: the manufacturer's troubleshooting table traces plugged inlets, a drain that keeps running and internal leaks to foreign material in the valve. On city water we do not install a softener without one. That is our practice, not a code requirement.

Is the water in Clearwater and Pinellas County hard?

Pinellas County Utilities publishes 10–15 grains per gallon for its water, and its 2025 water quality report measured 189–244 mg/L — very hard on the USGS scale. Clearwater has no single figure: about 60 percent of its water comes from its own wells and the rest is bought from Pinellas County Utilities. Our article lists the figure each utility publishes.

Do I need a water test before choosing a system?

On city water, your utility's water quality report and what you see at the taps usually point the way. On a well, or where iron or a sulfur smell is involved, the treatment should be chosen from a water test.

Can you install a softener or filter I already bought?

Yes. We install systems customers bought themselves, and we service control valves such as Clack and Fleck, including on systems we did not install.

Can a water softener be installed outside?

It can be. Outside it needs a level, firm base, a drain and a power outlet nearby, and protection from sun and rain for the control valve — several common valves are made for dry, indoor locations only, so the equipment has to suit the spot.

Is the walkthrough free?

Yes, within 25 miles of Clearwater. If diagnostics or measurements are needed, the visit is $150, credited toward the job if you hire us.

What happens after I call or send a message?

If you call, Kate, our AI voice assistant, answers at any hour and takes down the request; overnight requests are the first we review in the morning. A WhatsApp message or an email to info@proplumbers.pro reaches our team directly. We then arrange a time, Monday to Friday, 8am to 6pm.

Related Services

Equipment We Install Water Heaters

From the Learning Center

How Hard Is Tampa Bay Water? The Numbers by Utility Softener, Filter or Reverse Osmosis — What Each One Actually Removes

Equipment we work with

We service water-softener and filter control valves — Clack, Fleck and others — including systems we did not install: programming, cleaning and small-part replacement. Our founder has worked with this equipment since 2010, from residential softeners to industrial filtration. We also install and service other major brands such as A.O. Smith, Aquasure and SpringWell, and we're glad to fit a system you bought yourself. See the equipment we install →

Warranty, permits & who does the work

Workmanship warranty

Workmanship warranty: 5 years on new construction, 1 year on repairs. Equipment carries the manufacturer's warranty.

Who does the work

Pro Plumbers FL is partner-owned — specialists who came together in one licensed company (CFC1432506). Viktor Zarubitskii — in the plumbing trade since 1998 — plans the job, makes the technical decisions and works on site. Our own plumbers do the plumbing. Work outside plumbing, such as concrete cutting, we either do ourselves or bring in a contractor — either way it is written into your quote.

Tell Us What You See in Your Water

Call, send a WhatsApp message or email us. Calls are answered 24/7 by Kate, our AI assistant; work is scheduled Monday–Friday, 8am–6pm.

Licensed CFC1432506 · Insured · Clearwater, FL + 50 miles